A comparison of the most common converted right angle drill used for winches vs the WinchRite.

1-Battery:  

The common right angle drill turns at 400rpm in slow speed. This 400rpm causes a load on the drill battery cranking amps depleting them at a rapid rate. Ripping the cranking amps from the battery results in a short battery capacity.  The resulting short capacity, in many cases will not complete a winching task. The overloading of the drill and battery results in a short life span of the battery itself. It has been reported that some drills have over heated to the point of fire hazards.

Problem Solved: 

The WinchRite turns at a variable speed up to 130rpm.  This lower speed produced by lower gearing ratios results in both greater torque and a much longer battery capacity. This allows the WinchRite to complete the winching tasks.

2-Drill Chuck Drive Failure:  

The common right angle drill is designed for drilling holes and has a threaded on chuck to insert various size drill bits. This threaded on chuck has a retaining screw which will snap when running in the reverse or counter clockwise rotation. This results in the chuck un-threading and could pose a potential safety risk, many of these chucks have been lost over board.  The reverse rotation function is needed for the lower cranking speed / greater torque of a two speed winch.

Problem Solved:   

The WinchRite has a 10mm square drive socket cog which will run in both rotations without failing. This allowing for proper operation of a two speed winch.

3-Weight:   

The common right angle drill weighs is 10.9 lbs or 4.95 kg. This generally requires both hands to operate.  This may result in a safety factor in the cockpit or walking about the deck.

Problem solved:   

The WinchRite is slightly less than 6.5 lbs or 2.95 kg.  This is 40% lighter. 

4-Weather Resistance / Water Intrusion :   

The common right angle drill is not designed for wet weather conditions.  Water will cause the drill to fail.   

Problem solved:   

The WinchRite is rated at IPX6 and is a sealed unit designed for high pressure spray.  It can withstand water splash from rough sea conditions and rain when mounted in a winch. 

5-Warranty:  

Manufacturers of the various hand held drills do not cover damage or failure while using the device for non-drilling applications.  Your warranty may be void if improper use is discovered.  

Problem solved:  

The WinchRite is designed for sailing applications and we stand behind our product 100%. 

Sailology, LLC | Warehouse Facility-Not Open To The Public: Peoria, Arizona 85383 | Contact By Email Only: [email protected]

Language Translator